[iPhone Dev-Team] - PwnageTool, QuickPWN FW 2.2.1 (Mac)

      [iPhone Dev-Team] - PwnageTool, QuickPWN FW 2.2.1 (Mac)

      k


      Official Bittorrent Releases -



      Wichtig!:
      i
      Locked iPhone 3G

      If you are using your iPhone with one carrier and have no interest in the possibility of an iPhone 3G unlock
      in the near future then just restore or upgrade to 2.2.1 using iTunes and use QuickPwn
      to Jailbreak and add Cydia and Installer.

      SIM Free/SP Unlocked/Factory Unlocked iPhone 3G

      This applies if you bought your iPhone 3G for $$$$$$$.
      This model of iPhone 3G doesn’t have an Service Provider lock (aka factory unlocked)
      and you are able to put any SIM card into the phone and get service.
      Your phone is already unlocked so you do not need to worry about baseband updates,
      simply upgrade to 2.2.1 using iTunes and then use QuickPwn to Pwn and Jailbreak. This will add Cydia and Installer too.

      k

      http://blog.iphone-dev.org/

      Re: Neues vom iPhone Dev-Team - PwnageTool 2.2.5 für FW 2.2.1



      This is the low down on our tools for use with the 2.2.1 firmare from Apple, read the whole post in full before attempting anything. The release hasn’t been seeded yet as we are just completing some final tests (this means it isn’t released as yet!)

      1. GOLDEN RULE: If you have a 3G iPhone running 2.2 firmware and you want to keep your ability to use yellowns0w (or the option to use it in the future) do NOT use QuickPwn, and do not use the official ipsw or the iTunes update process without using PwnageTool.
      2. Read item 1 again and again.
      3. At the bottom of this post are the bittorrent files for the latest versions of PwnageTool and QuickPwn.
      4. These are suitable for the recent 2.2.1 release.
      5. Please read all parts of this post before downloading and using these tools.
      6. Users of OS X 10.5.6 will be unable to use DFU mode correctly, please see the note towards the end of this post to easily fix this issue.

      1. Goldene Regel wenn Du ein iPhone3G und weiterhin yellowsn0w benutzen möchtest, dann verwende nicht QuickPWN und eben so wenig die original Firmware 2.2.1 Führe den Update auf 2.2.1 nur mit der selbst erstellten CustomIPSW aus. Benutze dafür PWNage Tool.
      2. Lese den ersten Post immer wieder.
      3. Am Ende des Beitrages findest Du die Downloadlinks.
      4. Diese entsrechen der aktuellen Firmware.
      5. Lese bitte alles vorm Download und Benutzung der Software.
      6. Für die Benutzer vom OS X 10.5.6 wird es unmöglich sein den DFU Mode zu betreten. Um dieses Problem zu beheben, siehe die Anleitung am Ende des Post.





      Baseband 101

      The ‘baseband’ is the generic name given to the internal components of the iPhone that handle the phone calls and Internet access. This ‘baseband’ is a tiny and unique independent computer system that runs inside your iPhone, it is separate to the main system that handles the applications (such as email and google maps) and it talks to the main part of the phone over an internal communications network. Think of it like a cable modem or other peripheral that is attached to your home PC that needs occasional updates. When a software update is released and presented to you within iTunes the baseband is sometimes updated (to fix bugs or add new features). The 2.2.1 update for the iPhone 3G contains such an update, so running the vanilla updater straight away with iTunes will reprogram and update the baseband. This could be bad for certain people, depending on your ultimate aim.

      SIM Free/SP Unlocked/Factory Unlocked iPhone 3G
      -This applies if you bought your iPhone 3G for $$$$$$$. This model of iPhone 3G doesn’t have an Service Provider lock (aka factory unlocked) and you are able to put any SIM card into the phone and get service. Your phone is already unlocked so you do not need to worry about baseband updates, simply upgrade to 2.2.1 using iTunes and then use QuickPwn to Pwn and Jailbreak. This will add Cydia and Installer too.
      Alle, die ein vom Werk aus unlocked iPhone3G haben, können einfach via iTunes auf 2.2.1 updaten, das iPhone aktivieren und dann mit QuickPWN jailbreaken.

      Locked iPhone 3G - Preserve Baseband
      - This applies if you have a locked iPhone 3G and you wish to update to 2.2.1 but preserve the iPhone’s current baseband software. Preserving the baseband will ensure that you can still use “yellowsn0w” the iPhone 3G unlock application. To upgrade your phone to 2.2.1 and preserve the state of the baseband you need to create a custom .ipsw with PwnageTool. This custom .ipsw will not contain the baseband update but of course will still allow all the cool new stuff from 2.2.1

      There are plenty of tutorials about this process on the web, but PwnageTool contains intuitive graphics and easy to follow prompts that should have you up and running in no time at all. Please note: PwnageTool is only available for Mac OS X.
      Für den Fall, du hast ein locked iPhone3G und möchtest jedoch einen Upgrade auf die Firmware 2.2.1 machen aber das Baseband von der Firmware 2.2 behalten, um weiterhin yellowsn0w nutzen zu können, erstelle ein Custom Firmware mit Hilfe von PWNage Tool ohne Baseband-update und spiele diese via iTunes auf das iPhone ein.
      Danach kannst du Software-Unlock ausführen.


      Locked iPhone 3G

      -If you are using your iPhone with one carrier and have no interest in the possibility of an iPhone 3G unlock in the near future then just restore or upgrade to 2.2.1 using iTunes and use QuickPwn to Jailbreak and add Cydia and Installer.
      Nur wenn du das iPhone 3G in Verbindung mit einem Vertrag nutzst und somit auf Unlock nicht angewiesen bist, kannst auf 2.2.1 updaten und zum Jailbreak QuickPWN nutzen

      iPhone 2G (1st Generation)
      -Update or Restore your iPhone 2G with iTunes then run QuickPwn to do the magic, ‘nuff said, you don’t need to worry about anything.
      Update oder Wiederherstellung via iTunes und dann QuickPWN

      iPod Touch 1G (Original iPod Touch)
      -Update to 2.2.1 with iTunes and run QuickPwn.
      Update oder Wiederherstellung via iTunes und dann QuickPWN

      iPod Touch 2G (New iPod Touch)

      -Sorry, no support at this time, but Redsn0w is being developed.
      Noch kein Support, Redsn0w ist noch in der Entwicklungsphase

      Fixing DFU mode on 10.5.6

      As noted previously OS X 10.5.6 introduced a bug that affected the use of DFU mode. There have been previously published hacks and techniques to fix this, but there is another method that can be used to easily restore functionality.

      1. You will need an account with ADC (Apple Developer Connection) this is free and takes a few minutes to sign up, you should read the terms and conditions carefully and you should only sign up if you are thinking of developing applications in the future - developer.apple.com/mac/" oncl…(this.href);return false;
      2. Download the disk image “IOUSBFamily Log release for Mac OS X 10.5.5 Build 9F33” (yes, that is a “5” in 10.5.5 - this is a developer debug package of the USB kernel extension).
      3. Install IOUSBFamily-315.4.1.pkg from within the disk image
      4. Reboot your system!




      .: Fixing DFU Mode auf OS X 10.5.6
      Es ist bekannt, dass auf OS X 10.5.6 DFU Mode nicht ohne Weiteres möglich ist. Das DevTeam schlägt folgendes vor.
      1. Estelle ein Account bei Apple Developer Connection, dies nimmt wenige Minuten in Anspruch: developer.apple.com/mac/" oncl…(this.href);return false;
      2. Lade image von "IOUSBFamily Log release for Mac OS X 10.5.5 Build 9F33” runter.
      3. Installiere IOUSBFamily-315.4.1.pkg von diesem Image.
      4. Starte Mac neu.

      Ich selbst fahre immer noch auf OS 10.5.5 möchte aber gern updaten OHNE Fixing DFU zu verwenden, denn viele berichten danach über Ausfall von USB / Tastatur / Maus Folge: Systemwiederherstellung.
      Auf einen netten Hinweis hab mir gestern einen USB-HUB bestellt, damit soll alles glatt laufen ;)

      Re: [iPhone Dev-Team] - PwnageTool/ QuickPWN 2.2.5 für FW 2.2.1!

      naja mit Aktivierung, oder ohne ...
      cydia, installer, oder beide ...
      Original Bootlogos, oder die mit der Ananas ...
      wie gross die root Partition ist ...

      des mein ich :D